Ventilair Engineers Private Limited

We offered effluent treatment plant in different industries. Phycochemichal method is fit for this type of industries Flocolater & aggitater will be must for remove adhesive. Ventilair Engineers is a leading manufacturer and supplier of Industrial Effluent treatment plants for.These effluent treatment plants are used by different industries to reduce the potential for pollution and to comply with discharge consent conditions. 

Ventilair Engineers provides effluent treatment plants for leather industry.it must be need to effluent treatment plant for less odor bacteria.we found lot of Bactria at this type area.

VENTILAIR ENGINEERS is a leading maufacturer & supplier company . we have alredy installed 700 Plant in all over india. this type of plant in pajab kesri jalandher and Replica Press Kundli, Sonipat.
The printing process is a dry system and as such no water is used any where .How ever, some wet processing is carried in the form of photoengraving and plate making, where the negatives are developed and washed. In addition some metallic dyes are also used, and the plates are washed, which also generates some amount of waste water. The waste water generated from the washing steps are collected and treated in an Effluent Treatment Plant The printing process is a dry system and as such no water is used any where .How ever, some wet processing is carried in the form of photoengraving and plate making, where the negatives are developed and washed. In addition some metallic dyes are also used, and the plates are washed, which also generates some amount of waste water. The waste water generated from the washing steps are collected and treated in an Effluent Treatment Plant

The working principle of ETP

Industrial waste water treatment is one of the most important components of the ETP, this is because of the fact that it helps to check out the water pollution and helps in purifying it by getting rid of all the harmful chemicals, if any. The working principle of ETP is undertaken to be one of the most effective principles where a large amount of human friendly chemicals is used that is applied in the water to make it free from all the factors that might be harmful to human and aquatic life. This is an important part that can be highlighted that helps to highlight that the working principles vary in a number of ways, furthermore, with the service that is provided by the ETP plants, the water bodies are kept clean and a large amount of water is well treated.

Treatment technique  are also Moving bed bioreactor (mbbr), fluidized aerated reactor and clarifier

The meaning of effluent treatment plant

The Effluent Treatment Plant is one of the most sophisticated and scientific processes undertaken to make sure that all the industrial wastewater is treated in a proper manner. The process includes ETP plants that are built to treat water from a large area and make the contamination free. The process of treatment followed by industries would make sure that no contaminant comes into contact with the surface water bodies.

The importance of Effluent Treatment Plant

Effluent treatment plants are an important part of the industries which helps in cleaning the water released out from them. The need for ETP plants came into existence with implementation of India’s Water (Prevention and Control of Pollution) Act, 1974. This has been made mandatory to be installed in industries by the act. There are a number of industries where water has been used while producing products and after using the water it was being released out into the environment directly without knowing about its effects. The Effluent Treatment Plant process helps in treating the polluted water before releasing it into the environment. The ETP process is made up of different techniques which are used for treating and cleaning the waste water coming out from different kind of factories

• Physico-chemical Water Treatment Processes
• Stages of the Physico-Chemical Process
• Coagulation (or rapid mixing)
• Flocculation (or slow mixing)
• Screen Filter
• Oil Interceptor
• Sedimentation
• E.T.P unit Oil and Grease Tank has the installation in line with the design criteria of State Pollution Control Board.

Ventilair Engineers is a leading manufacturer supplier of Physico-chemical treatment.

Biological Treatment The ratio of COD : BOD is favorable for applying biological method of treatment preceded by some from of pretreatment such as flow equalization and oil and grease removal. Physico-chemical treatment of wastewater focuses primarily on the separation of colloidal particles. This is achieved through the addition of chemicals (called coagulants and flocculants). These change the physical state of the colloids allowing them to remain in an indefinitely stable form and therefore form into particles or flock with settling properties

The treatment process comprises of :-

• Physico-chemical Water Treatment Processes
• Stages of the Physico-Chemical Process
• Coagulation (or rapid mixing)
• Flocculation (or slow mixing)
• Screen Filter
• Oil Interceptor
• Sedimentation
• E.T.P unit

Oil and Grease Tank has the installation in line with the design criteria ofState Pollution Control Board.
Specifications:

• Size: 1.0 mtrs x 1.7 mtrs. X 2.1 mtrs. To 5 mtrs. X 1.5 mtrs. 2.5 mtrs
• Power: 2 hp to 30 hp
• Application: Various Type Of Industries, Automobile Workshop, Vehicle Washing Units
• Uses: To reuse waste water
• Material: MS Fabricated with FRP Coating
• Capacity: 1 kld to 1000 kld

Additional Information:

• Minimum Order Quantity: 1 Unit

• Voltage: Use Steam
• Processing Material: Milk, Fruit Juice, Waste Water, Herbal Liquid
• Capacity: 100-5000
• Process: Concentration and Dry
• Capacity: 100 kld